Mechanical Anchors
Wedge Anchor
A non-bottom-bearing, wedge-style expansion anchor for use in solid concrete or grout-filled masonry. The Wedge-All wedge anchor is available in carbon steel with zinc or mechanically galvanized coating, as well as stainless steel.
Sleeve Anchor
Sleeve-All expanding anchors are pre-assembled, expanding sleeve anchors for use in all types of solid base materials. This anchor is available in acorn, hex, rod coupler or flat head style for a wide range of applications.
Titen HD - Heavy Duty Screw Anchor
The original high-strength screw anchor for use in cracked and uncracked concrete, as well as uncracked masonry. The Titen HD offers low installation torque and outstanding performance.
EZ Set
The Easy-Set is a pin-drive expansion anchor for medium- and heavy-duty fastening applications into concrete and grout-filled block. Integrated nut and washer help keep track of parts.
Zinc Nailon
Zinc Nailon anchors are low-cost, easy-to-install anchors for applications under static loads.
Crimp Drive
The crimp anchor is an easy-to-install expansion anchor for use in concrete and grout-filled block. The pre-formed curvature along the shaft creates an expansion mechanism that secures the anchor in place and eliminates the need for a secondary tightening procedure.
Drop In
Drop-In anchors are internally threaded drop-in expansion anchors for use in flush-mount applications in solid base materials.
Hollow Wall Drop In
Hollow Drop-In Anchor is an internally threaded, flush-mount expansion anchor for use in hollow materials such as CMU and hollow-core plank, as well as in solid base materials such as brick, normal-weight and lightweight concrete.
Threaded Rod Hanger - Concrete
The Titen HD threaded rod hanger is a high-strength screw anchor designed to suspend threaded rod from concrete slabs, beams or concrete over metal in order to hang pipes, cable trays and HVAC equipment.
Threaded Rod Hanger - Wood / Steel
The wood or steel rod hanger is a one-piece fastening system for suspending 1/4″ or 3/8″ threaded rod. Available in Vertical or Horizontal for Wood or Self Drilling Steel applications.
Mungo
Zinc Wall Anchor
Chemical Anchors
Simpson AT-XP
Formulated for high-strength anchorage of threaded rod and rebar into cracked and uncracked concrete and masonry under a wide range of conditions, AT-XP adhesive dispenses easily in cold or warm environments and in below-freezing temperatures with no need to warm the cartridge.
Simpson Set-XP
SET-XP epoxy anchoring adhesive is a high-strength formula for anchoring and doweling in cracked and uncracked concrete and masonry applications. It is a two-part system with the resin and hardener being simultaneously dispensed and mixed through the mixing nozzle.
PC Concrete (Made In PA)
PC-Concrete Anchoring and Crack Filling Epoxy— is the epoxy chosen to repair cracks in warehouse and factory floors. Dispense and apply using a standard size caulking gun. Cures hard enough to drive over within 3 hours at standard temperature. Nothing stronger for your anchoring applications. PC-Concrete is a two component (1:1 ratio), 100% solids, high modulus, and structural epoxy paste. PC-Concrete is a solvent free, no odor, high strength, moisture insensitive epoxy system. The resin and hardener are uniformly dispensed from a 9 ounce cartridge system and mixed through a mixing nozzle using a standard size caulking gun. (We recommend at least an 18:1 thrust ratio).
PC Concrete - Pro (Made In PA)
Two component, professional grade, high-strength anchoring epoxy for cracked and uncracked concrete
Use for anchoring threaded rod and reinforcing bar into cracked or uncracked concrete using hammer drill or threaded rod into uncracked concrete using core drill
Code compliant for Bulk Applications; Meets building and engineering codes: IAPMO UES ER-632, IBC/IRC 2018, 2015, 2012 & 2009, Florida Building Code 2017 & 2014, AASHTO M235 / ASTM C881-15 Type I, II, IV & V Grade 3 Class A, B & C
Direct Fastening
Powder Actuated
PC-Concrete Anchoring and Crack Filling Epoxy— is the epoxy chosen to repair cracks in warehouse and factory floors. Dispense and apply using a standard size caulking gun. Cures hard enough to drive over within 3 hours at standard temperature. Nothing stronger for your anchoring applications. PC-Concrete is a two component (1:1 ratio), 100% solids, high modulus, and structural epoxy paste. PC-Concrete is a solvent free, no odor, high strength, moisture insensitive epoxy system. The resin and hardener are uniformly dispensed from a 9 ounce cartridge system and mixed through a mixing nozzle using a standard size caulking gun. (We recommend at least an 18:1 thrust ratio).
